The Cat 5E 350MHz Jack is designed to protect network information against unwanted cross signals and provide transmission performance above 100MHz for long-term peak performance. This product meets and exceeds industry standards set by ANSI/TIA-568 C.2 Cat 5E Channel and by Permanent Link Requirements. This jack is also UL Verified and/or ETL Safety Listed and RoHS compliant. Installation of the Cat 5E 350MHz Jack is quick and easy when used with the comCables 90° Rapid Punch Tool. This product is offered in black, blue, green, ivory, orange, red, white, yellow, gray or purple.

Specification
Meets ANSI/TIA-568 C.2 Cat 5E Channel & Permanent Link Requirements
ISO/IEC 11801 Class E Category 5E Performance Standards
Meets FCC Part 68
Safety Standard – cUL | UL
Insulation Resistance – 500 MOhm Min. @ 100 VDC
Dielectric Withstanding Voltage – 1000 Vac rms @ 60Hz For One Minute Contact-to-Contact
Current Rating – 1.5Amps
Spring Wire Contact Resistance – 20 MOhm Max.
IDC Contact Resistance – 2.5 MOhm Max.
Current Rating – 1.5 A @ 20°C — 1.5 A @ 68°F
Dielectric Withstand Voltage, RMS, Conductive Surface – 1500 Vac @ 60 Hz
Dielectric Withstand Voltage, RMS, Contact-To-Contact – 1000 Vac @ 60 Hz
Relative Humidity – Up to 95%, Non-Condensing

Mechanical Specifications
Conductor Gauge, Solid – 22 AWG | 24 AWG | 26 AWG
Conductor Gauge, Stranded – 22 AWG | 24 AWG
Termination Life – 522 Cycles
Total Contact Force – > 100 Grams Per Contact Wire Lead
Retention – 50 N (11 Ibf ) For 60s ± 5s
Durability – 750 Cycles Min.
Temperature Range Storage – -40ºC ~ +70ºC
Temperature Range Operation – -10ºC ~ +60ºC
Relative Humidity Operation – Max. Non Condensing 95%
Plug Insertion Life Test Plug – IEC 60603-7 compliant plug
Plug Retention Force, Minimum – 30 lbf | 133 N
Rear Termination Type – IDC
Wiring – T568A | T568B

Materials
Housing – High Impact Flame Retardant Plastic, UL 94 v-0 Rated
PCB – FR4, 1.6mm Thickness
IDC – Phosphor Bronze Alloy Plated W/ 100 Micro-Inch of Tin
Spring Wire Phosphor Bronze Alloy Plated W/ 50 Micro-Inch Of Gold Over 70 ~ 100 Mirco-Inch of Nickel

For easiest and quickest termination use our 180 1/4 Rapid Punch Down Tool.