Cat 3 UTP Performance Jack

PART NUMBER: SKU: CN-C3-OR-C

Home > Structured Cabling > Workstations & Outlets > Cat 3 Jacks > Cat 3 UTP Performance Jack
  • Cat 3 UTP Performance Jack
 

Overview

Features:

Dimensions 
Depth – 32.70mm | 1.287in
Height – 19.05mm | 0.750in
Width – 17.00mm | 0.669in

Construction Materials 
Housing – High-Impact, Flame-Retardant Plastic, UL 94V-0
Spring Wire – Phosphor Bronze Alloy Plated W/ 50 MIcro-Inch of Gold
IDC – Phosphor Bronze Alloy W/ 100 Mirco-Inch 100% Sn Alloy

General Specifications 
Cable Type – U/UTP (unshielded)

Environmental Specifications 
Flammability Rating – UL 94 V-0
Meets FCC Part 68
Safety Standard – cUL | UL
Relative Humidity – Up to 95%, non-condensing
Operating Temperature –  -40ºC to + 80ºC ( -40°F to + 176°F)

Mechanical Characteristics 
Insertion / Extraction Life – 750 Cycles Minimum
IDC Wire Gauge – 22 ~ 24 AWG
Rear Termination Type – IDC
Wiring – USOC (6 Position)  

Electrical Characteristics 
ANSI/TIA-568-C.2 Category 3 Channel & Permanent Link Requirements
ISO/IEC 11801 Class C Category 3 Performance Standards
Electrical Insulation Resistance – 500MΩ Min. @ 100V D.C.
Dielectric Withstanding Voltage – 1000V D.C. or A.C. Peak
Contact to Contact @ 60Hz for 1 Minute. 

Performance Line